PURE Evoke-1 Owner's Manual page 8

Tuning aid
Provides a signal level display which you can use to find the best position for your radio and aerial.
1. Turn the Tune knob to scroll through different channels and push to select one. You see a signal level display. The
2. Move your aerial while watching the display and to try to raise the current level to the empty block or beyond. Once
3. Push the Menu button to exit the tuning aid or turn the Tune knob to select another channel.
Note You can also display the signal level at any time for a station you are listening to by pushing the Tune knob.
DRC value
DRC (Dynamic Range Control) value makes the quieter sounds in a broadcast easier to hear at low volume or in a noisy
environment. The DRC (Dynamic Range Control) level of a broadcast is set by the station and sent with the signal. Check
with the broadcasters to find out if they use DRC on their stations. Turn the Tune knob to scroll through the following
options and push to select one:
DRC 0
DRC ½ DRC level is set to ½ that sent with the broadcast.
DRC 1
5
empty block indicates the minimum required level for reception and the filled blocks indicate the current level.
you have a good signal the display will show the multiplex name and add the stations to the station list.
DRC is switched off. Any DRC level broadcast will be ignored. This is the default setting.
Applies the DRC level as sent with the broadcast.