Setting A Countdown Timer - PURE Evoke-1 Owner's Manual

Setting a countdown timer

You can set a timer which will sound an alarm after a period — ideal for use in the kitchen.
1. Press the Timer button.
2. Turn the Tune knob to change the hours, push and turn again to change the minutes and push again to confirm.
The timer is now set and the alarm will sound after the period you have set whether the radio is on or in standby. To view
the time remaining press the Timer button again. To cancel or reset the timer to zero before it goes off, press and hold
down the Timer button for three seconds. When the timer alarm goes off you can cancel the alarm by pushing the Tune or
Standby button.
Note that the timer alarm volume is at a set value so is not dependant on the volume setting of your radio.
9