Finding A Network - NETGEAR WG111V2 User Manual

NETGEAR 54 Mbps Wireless USB 2.0 Adapter WG111v2 User Manual

Finding a Network

During the Wireless Adapter software installation, the Smart Wizard lists the available networks.
After installation you can use the Find a Network button on the Network tab at any time to view
the available networks and select the one that you want to use.
Note: Make sure that you know the security settings for the network that you want to use.
For example, if WEP is used then you need to know the WEP key. If you use
secure networks frequently, set up profiles for each network with the wireless
network and security settings.
To find a Network, follow these steps:
1. Use the icon to open the Smart Wizard.
The Settings tab page opens.
2. Click Find a Network.
3. Select a network from the
drop-down list. If you select a hidden network then you must enter the SSID. Click Next.
4. Follow the steps of the wizard to specify the wireless security if used, and to create a profile.
5. Review you settings, and click Finish.:
Figure 13
14
v3.0, January 2007
Hidden