Removing The Software - NETGEAR WG111V2 User Manual

3. Place one of the other pieces of loop and hook fastener on the back of the monitor near the top
for better reception.
Tip: Place the last piece of fastener on the side of monitor nearest your wireless
access point.
4. Join the pieces of the fastener to attach the USB Adapter in the plastic cradle to the notebook
or desktop monitor.
Figure 10
See the installation instructions for your operating system before attaching the USB cable to the
USB Adapter and your computer

Removing the Software

You can remove the Wireless Adapter software in these two ways:
• Navigate the Windows Start menu to the NETGEAR 54 Mbps Wireless USB2.0 Adapter
WG111v2 program group, select the uninstall option, and follow the screen prompts.
• Navigate the Windows Start menu to the Control Panel Add or Remove Program item, select
the NETGEAR 54 Mbps Wireless USB2.0 Adapter WG111v2 option, and follow the screen
prompts.
NETGEAR 54 Mbps Wireless USB 2.0 Adapter WG111v2 User Manual
v3.0, January 2007
9