Setting Up Wpa2-Psk Security - NETGEAR WG111T User Manual

Note: Larger encryption keys require more processing and may slow the
communications response times.
4. Select Create with Passphrase and enter the passphrase. The configuration utility will
automatically generate the WEP keys.
Note: The characters are case sensitive. Be sure to use the same passphrase for all the
wireless devices in the network.
If the passphrase method is not available in the other devices, you must manually enter the
keys to match exactly what is in the access point and other 802.11b wireless devices.
5. Save your settings in a Profile.
a. Click the Save Profile button. All the configuration settings are saved in this profile.
b. Click Apply and then click Close to exit the configuration utility.

Setting up WPA2-PSK Security

Follow the steps below to configure WPA2-PSK Security.
1. Run the WG111T Smart Wizard.
a. Make sure the WG111T software is installed and the WG111T is fully inserted in a USB
port in your computer.
b. Use the icon to open the Smart Wizard. The Settings tab page opens.
NETGEAR 108 Mpbs Wireless USB 2.0 Adapter WG111T User Manual
v2.0, February 2007
2-13