Sanyo PLC-WTC500AL Service Manual page 29

Mechanical Disassembly
8-1. Rear Fans Assy removal-1
1. Remove 1 screw-A (M3x6) and 1 screw-B (T3x8).
2. Remove 1 screw-C (T2.6x8) and remove the Thermal Protector (SW902)
and then remove the Side Shield Plate.
A
c
Thermal
protector
(SW902)
Side shield
plate
8-2. Rear Fans Assy removal-2
1. Remove 3 screws-D (T3x8) and remove the Rear Fan Assy.
2. Remove the Security Hook.
3. Remove 2 screws-E (M3x28) each on the Fans (FN901, FN902, FN903).
Mount the fans as the label on each fan must be facing outside.
B
thermal protector (SW902) removal
Groove
FN901
e
FN903
e
e
e
-29-
c
t2.6x8
Spacer
SW902
Printed marker is
facing out side.
d d
d
e
FN902
Security
hook