Technical Data - DeWalt DW716 Original Instructions Manual

MITRE SAW DW716/DW716E/DW716EXPS
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough product
E
development and innovation make D
partners for professional power tool users.

Technical Data

Voltage
(U.K. & Ireland only)
Type
Power input
Blade diameter
Blade bore
Blade body thickness
Max. blade speed
Max. cross-cut capacity 90°
Max. mitre capacity 45°
Max. depth of cut 90°
Max. depth of bevel cross-cut 45°
Mitre (max. positions)
Bevel (max. positions)
0° mitre
Resulting width at max. height 85 mm
Resulting height at max. width 203 mm
45° mitre left
Resulting width at max. height 85 mm
Resulting height at max. width 142 mm
45° mitre right
Resulting width at max. height 85 mm
Resulting height at max. width 144 mm
45° bevel left
Resulting width at max. height 56 mm
Resulting height at max. width 203 mm
45° bevel right
Resulting width at max. height 40 mm
Resulting height at max. width 203 mm
31.62° mitre, 33.85° bevel
Resulting height at max. width 168 mm
Automatic blade brake time
Weight
* DW716EXPS with Worklight LED
L (sound pressure)
PA
K (sound pressure uncertainty)
PA
L (sound power)
WA
K (sound power uncertainty)
WA
Vibration total values (triax vector sum) determined according to EN 61029:
Vibration emission value a
h
a =
h
Uncertainty K =
The vibration emission level given in this information sheet has been
measured in accordance with a standardised test given in EN 60745
and may be used to compare one tool with another. It may be used for a
preliminary assessment of exposure.
WARNING: The declared vibration emission level represents
the main applications of the tool. However if the tool is used
for different applications, with different accessories or poorly
WALT one of the most reliable
E
DW716 DW716E
DW716EXPS
V 230 230
V 230/115 230/115
2
W 1,675 1,675
mm 305 305
mm 30
mm 1.8 1.8
min- 1 3,600 1,900–3,400
mm 203 203
mm 144 144
mm 85
mm 56
left 50° 50°
right 50° 50°
left 50° 50°
right 50° 50°
mm 190 190
mm 72
mm 133 133
mm 72
mm 134 134
mm 72
mm 190 190
mm 47
mm 190 190
mm 30
mm 23
s < 10.0 < 10.0
kg 18.5* 18.5*
dB(A) 95
dB(A) 3.0 3.0
dB(A) 106 106
dB(A) 3.1 3.1
m/s² 2.2 2.2
m/s² 1.5 1.5
maintained, the vibration emission may differ. This may
significantly increase the exposure level over the total working
period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may
significantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and
the accessories, keep the hands warm, organisation of work
patterns..
2
Fuses:
Europe
U.K. & Ireland
30
U.K. & Ireland
NOTE: This device is intended for the connection to a power supply system
with maximum permissible system impedance Zmax of 0.30 Ω at the
interface point (power service box) of user's supply.
The user has to ensure that this device is connected only to a power system
85
which fulfils the requirement above. If necessary, the user can ask the public
56
power supply company for the system impedance at the interface point.
Defi nitions: Safety Guidelines
The definitions below describe the level of severity for each signal word.
Please read the manual and pay attention to these symbols.
DANGER: Indicates an imminently hazardous situation which, if
not avoided, will result in death or serious injury.
72
WARNING: Indicates a potentially hazardous situation which, if
not avoided, could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if
not avoided, may result in minor or moderate injury.
72
NOTICE: Indicates a practice not related to personal injury
which, if not avoided, may result in property damage.
Denotes risk of electric shock.
72
Denotes risk of fire.
47
EC-Declaration of Conformity
MACHINERY DIRECTIVE
30
23
DW716/DW716E/DQW716EXPS
D WALT declares that these products described under "technical data" are
E
in compliance with:
2006/42/EC, EN 61029-1, EN 61029-2-9.
These products also comply with Directive 2004/108/EC. For more
95
information, please contact D
back of the manual.
The undersigned is responsible for compilation of the technical file and
makes this declaration on behalf of D
Horst Grossmann
Vice President Engineering and Product Development
D WALT, Richard-Klinger-Straße 11,
E
D-65510, Idstein, Germany
29.12.2009
230 V tools 10 Amperes, mains
230 V tools 13 Amperes, in plugs
115 V tools 16 Amperes, mains
WALT at the following address or refer to the
E
WALT.
E
E N G L I S H
27