Basic Controls - Panasonic TH-50PH30U Operating Instructions Manual

Basic Controls

Main Unit
Remote control sensor
Main Power On / Off Switch
Power Indicator
The Power Indicator will light.
• Power-OFF .... Indicator not illuminated (The unit will
still consume some power as long as the
power cord is still inserted into the wall
outlet.)
• Standby ........ Red
• Power-ON ...... Green
• PC POWER MANAGEMENT (DPMS)
....................... Orange (With PC input signal.)
When this function is set to ON, it operates under the following conditions to turn the power on or
off automatically.
When no pictures (HD/VD sync signals) are detected for 30 or so seconds during PC signal input:
When pictures (HD/VD sync signals) are subsequently detected:
• DVI-D POWER MANAGEMENT
.......................Orange (With DVI input signal.)
• NO SIGNAL POWER OFF
.......................Red
Equipment power supply is turned OFF when there is no signal.
When this is set to "ENABLE", the power supply of the unit goes Off 10 minutes after the input
signals stop.
INPUT
→ Power is turned off (standby); the power indicator lights up orange.
→ Power is turned on; the power indicator lights up green.
+
MENU -/ VOL / ENTER/
MENU Screen ON / OFF
Each time the MENU button is pressed, the menu screen
will switch. (see page 15)
Normal Viewing
INPUT button (Input signal selection)
(see page 12)
Volume Adjustment
Volume Up "+" Down "–"
W h e n t h e m e n u s c r e e n i s
displayed:
"+" : press to move the cursor up
"–" : press to move the cursor down
(see page 15)
Enter / Aspect button
(see page 15)
PICTURE
SOUND POS./SIZE
SET UP
13