Basic Controls - Panasonic TH-86EQ2W Operating Instructions Manual

Basic Controls

Main Power On / Off button (
Main power switch (
(Back of the unit)
Remote control sensor / Power Indicator
Operate pointing the remote control directly at the unit's
Remote Control Sensor.
Note
●
Do not put an obstacle between the remote control
sensor of the main unit and the remote control.
●
Operate the remote control in front of the remote
control sensor or from the area where the sensor can
be seen.
● When directly aiming the remote control at the remote
control sensor of the main unit, the distance from
the front of remote control sensor should be approx.
7 m or less. Depending on the angle, the operation
distance may be shorter.
●
Do not subject the remote control sensor of the main
unit to the direct sunlight or strong fluorescent light.
1
Connect the AC cord plug to the
Display.
(see page 18)
) (Back of the unit)
) AC cord
(supplied)
AC socket outlet
2
Connect the plug to the socket outlet.
Note
●
Main plug types vary between countries. The
power plug shown at left may, therefore, not be
the type fitted to your set.
●
When disconnecting the AC cord, be absolutely
sure to disconnect the AC cord plug at the
socket outlet first.
●
The settings may not be saved if the power plug
is disconnected immediately after changing
settings with on-screen menu. Disconnect the
power plug after a enough period of time. Or,
disconnect the power plug after turning the
power off with the remote control, RS-232C
control or LAN control.
3
Turn ON ( ) the <Main power switch
( )> on the unit.
4
Press the <Main Power On / Off
button> ( ) on the unit to turn the
power of the unit on.
●
Power Indicator: Blue (Picture is displayed.)
● When the power of the unit is on, the power
indicator lights up and remote control operation is
possible.
● When the power indicator is lit, it is not necessary
to press the <Main Power On / Off button> (
on the unit. Operate the remote control so that the
power indicator turns blue (picture is displayed).
■
To turn the power ON/OFF with the remote
control
To turn the power on
●
When the <Main power switch> is ON ( ) (Power
Indicator - orange or purple), press <Standby (ON/
OFF) button> then the picture will be displayed.
●
Power Indicator: Blue (Picture is displayed.)
To turn the power off
●
When the <Main power switch> is ON ( ) (Power
Indicator - blue), press <Standby (ON/OFF) button>,
then the power will be turned off.
● Power Indicator: Orange or purple (standby)
Note
●
During operation of the "Power management"
function, the power indicator turns purple in the power
off state.
● After the power plug is disconnected, the power
indicator may remain lit for a while. This is not a
malfunction.
● The display turns off if the <Main power switch> is
turned OFF ( ) or press the <Main Power On / Off
button> ( ) on the unit while the unit is ON (picture
is displayed) or OFF (standby state).
●
When [Power LED light-up setting] is set to [Off], the
power indicator does not light up.
)
25
English