Selecting The Input Signal - Panasonic TH-50PH30U Operating Instructions Manual

Selecting the input signal

Press to select the input signal to be played back from the equipment which
has been connected to the Plasma Display.
Input signals will change as follows:
PC
VIDEO: Video input terminal in AV IN (VIDEO).
COMPONENT*: Component or RGB input terminal in COMPONENT/RGB IN.
HDMI: HDMI input terminal in AV IN (HDMI).
DVI: DVI input terminal in DVI-D IN.
PC: PC input terminal in PC IN.
* "COMPONENT" may be displayed as "RGB" depending on the setting
of "COMPONENT/RGB-IN SELECT".
Notes:
• Selecting is also possible by pressing the INPUT button on the unit.
• Outputs the sound as set in "Audio input select" in the Options menu.
• Select to match the signals from the source connected to the component/RGB input
terminals.
• Image retention (image lag) may occur on the plasma display panel when a still picture
is kept on the panel for an extended period. The function that darkens the screen slightly
is activated to prevent image retention, but this function is not the perfect solution to
image retention.
12
VIDEO COMPONENT* HDMI DVI
INPUT MENU -/ VOL + / ENTER/
+
INPUT MENU - / VOL / ENTER/