Whirlpool FSCR12433 Reference Manual page 7

Table of Contents

Advertisement

OPTIONS which are selectable by pressing the Options
button
Prewash
Helps to clean heavily soiled laundry by adding a prewash
phase to the wash programme selected.
Extends the programme by about 20 minutes.
Add detergent to the prewash compartment of the detergent
dispenser as well, or directly into the drum. Use powder detergent
for the main wash in order to ensure that the detergent stays in the
detergent dispenser until the start of the main wash phase.
Hot Finish
The programme ends with a warm rinse phase. This relaxes
the fibres of your laundry, and the laundry feels
comfortably warm when taking it out a short time after
programme end.
Bio Stains 15°
Helps to remove all kinds of stains, except grease/oil.
The programme begins with a cold water wash phase.
Extends the programme by about 10 minutes.
Pre-treatment recommended for stubborn stains.
Not selectable for Cotton 95°C.
Heavy Soil
Helps to clean heavily soiled, stained laundry by optimising
the efficiency of additives for stain removal.
Add an appropriate amount of in-wash additive for stain
removal (powder) to the main wash compartment, together with
your detergent (powder only). May extend the programme by up to
15 minutes.
Appropriate for use with oxygen-based stain removers and
bleaching agents.
Chlorine or perborate bleaches must not be used!
Intensive Rinse
Helps to avoid detergent residues in the laundry by
extending the rinse phase.
Particularly suitable for washing baby laundry, for people
suffering from allergies and for areas with soft water.
Rapid
Enables quicker washing.
Recommendable for only lightly soiled laundry.
Not selectable for Cotton 95 °C.
FUNCTIONS
Rinse hold (selectable with Spin button)
Avoids automatic spinning of the laundry at the end of the
programme. The laundry remains in the last rinse water, the
display indicates the rinse hold and the programme does not
continue.
Suitable for delicate laundry which is not appropriate for spinning,
or which should be spun with a low spin speed. Not suitable for silk.
To select "Rinse hold":
• Press the spin button; select Rinse hold. The Rinse hold symbol on
the display lights up.
The display indicates when the programme has reached the Rinse
hold. Choose to:
• drain the water, no spin:
press the Spin button, or the UP or DOWN key, to select
spin speed "0". Or select programme Drain. Afterwards
press Start/Pause: the water will be drained and the
programme ended
• spin the laundry:
the default spin speed blinks - start the spin cycle by
pressing Start/Pause. Or select a different spin speed by
pressing the Spin button and the UP or DOWN key, and
press Start/Pause.
Finish in
Enables to have the laundry ready at a particular time by
setting a delay until end of the programme.
Choose a delay up to 23:30 hours. Do not use liquid
detergent with this function.
• Select programme, temperature and options.
• Press the "Finish in" button – the button lights up.
• Press UP or DOWN key to select a delay up to 23:30 hours.
• Press "Start / Pause" - the countdown of the delay starts. The
display indicates the Finish in period (= time until end of
programme), as well as the default programme duration.
• The programme starts automatically, in time to be finished at the
end of the delay period. On programme start, the delay on the
display is replaced by the current programme status.
To cancel the delay
• either press Start/Pause to cancel the delay; to start the selected
programme immediately, press Start/Pause again
• or press and hold On/Off to cancel the complete programme
setting.
Key lock
To lock the buttons and keys of the control panel against
unwanted operation.
To lock:
• The washing machine must be switched on.
• Press and hold the option button until the display indicates
that the keys are locked. The buttons and keys are locked
now; only On/Off works.
If you switch the washing machine off and on again, the key
lock remains active until you unlock it.
To unlock: press and hold the option button again for at least 3
seconds, until the display indicates that the keys are unlocked.
INDICATORS
Door can be opened
Energy /
Water monitor
Gives feedback about the energy and water
consumption of your programme setting.
The less indicators light up, the more economic
is your programme setting. Can still adapt after
sensing phase of laundry load.
Failure: Observe the display message.
For any failures , refer to section Troubleshooting in the
"Use and Care Guide".
Descaling
A display message will remind you regularly to descale the washing
machine. Find descaler appropriate for the washing machine on
www.whirlpool.eu.
To cancel the display reminder, press the OK key.
EN
7

Advertisement

Table of Contents
loading

Table of Contents