Hints And Tips; Consumption Data - Whirlpool FSCR12433 Reference Manual

SETTINGS
The following settings can be changed / selected:
Display language / key tones / cycle end alert/ display contrast /
water hardness / dosing aid (adjust dosing amounts for the
detergents you use) / eco mode (automatic switch-off function after
programme end) / return to factory settings.
• Press and hold the Settings button for at least 3 seconds.
• Select the setting which you want to change by pressing the UP or
DOWN key. Afterwards press the OK key.

HINTS AND TIPS

SORT YOUR LAUNDRY ACCORDING TO
• Type of fabric / care label (cotton, mixed fibres, synthetics, wool,
handwash items)
• Colour (separate coloured and white items, wash new coloured
articles separately)
• Size (wash items of different sizes in the same wash load to
improve washing efficiency and distribution in the drum)
• Delicates (wash small items – like nylon stockings – and items with
hooks – like bras – in a cloth bag or pillow case with zip.
EMPTY ALL POCKETS
• Objects like coins or safety pins can damage your laundry as well
as the drum.
WASH CARE LABELS
The temperature in the washtub symbol indicates the maximum
possible temperature for washing the item.
Normal mechanical action
Reduced mechanical action
Much reduced mechanical action
Hand wash only
Do not wash

CONSUMPTION DATA

This data may differ in your home due to changing conditions in inlet water temperature, water pressure etc.
TEMPERATURE
PROGRAMME
Mixed
Cotton
Cotton
Cotton
Synthetics
Synthetics
ECO COTTON
ECO COTTON
ECO COTTON
Values measured in normal conditions in accordance with IEC/EN
60456. Water, energy and remaining moisture content values refer
to the default setting of the programmes, without options.
max = maximum load capacity of the washing machine
Acoustic values on declaration label refer to appliance after
complete installation, with adhesive pads fixed on bottom of
washing machine according to separate instructions.
4
LOAD
(°C) (KG)
40 7.0
95 12.0 (max)
60 12.0 (max)
40 12.0 (max)
60 4.0
40 4.0
60 12.0 (max)
60 6.0
40 6.0
• Press the UP or DOWN key to select the setting, afterwards
confirm it by pressing the OK key.
• To exit the Settings mode, either press UP or DOWN key until the
display indicates that you can exit – then confirm by pressing the
OK key. Or wait for a few seconds until the Settings mode will be
ended automatically.
CLEAN THE WATER FILTER REGULARLY
• Helps to avoid that it can get clogged and that the drain water
cannot be pumped out anymore. Refer to section CARE AND
MAINTENANCE / "Cleaning the water filter" in the Use and Care
guide.
SAVINGS AND ENVIRONMENT
• Achieve the best use of energy, water, detergent and time by
using the recommended maximum load size for the programmes,
as indicated in the programme chart.
• Do not exceed the detergent dosages indicated in the detergent
manufacturer's instructions. Use the Dosing Aid function.
• Save energy by using a 60 °C instead of a 95 °C wash programme
or a 40 °C instead of a 60 °C wash programme. For cottons, the Eco
Cotton programme at 40 °C or 60 °C is recommended.
• Save energy and time by selecting a high spin speed to reduce the
water content in the laundry before using a tumble dryer.
WATER ENERGY
(L) (KWH)
67 0.50
126 3.50
120 2.00
94 1.70
58 1.20
55 0.80
63 0.51
43 0.46
43 0.43
* Duration indicated after load sensing
Eco Cotton is the standard programme for washing normally soiled
cottons, and it is the most efficient programme in terms of
combined water and energy consumption. For reasons of energy
saving,the real water temperature may deviate from the specified
cycle temperature.
Power consumption in off-mode is 0.25 W/in left-on mode 0.25 W.
APPROXIMATE
PROGRAMME APPROXIMATE
DURATION (H:MIN) REMAINING
MOISTURE
WITHOUT
CONTENT (%)
WITH RAPID
RAPID
01:00 00:55
03:15 --
02:35 01:55
03:30 02:10
02:20 01:20
02:20 01:20
06:00 04:00
04:00 *
04:00 *
55
55
55
55
35
35
53
53
53