Table of Contents
Advertisement
4.
SWITCH ON WASHING MACHINE
• Press the On/Off button. An animation appears, and there
is a sound. The programme which was used last lights up.
Afterwards the washing machine is ready to be operated.
5.
SET THE DESIRED PROGRAMME
• Select programme:
Press the programme symbol on the control panel. Programme
name, default duration, temperature and spin speed as well as
maximum laundry load appear on the display.
• Change temperature, if needed
Press the temperature button; the display indicates that the
temperature can be set.
• Press the temperature button repeatedly
OR
• press the UP or DOWN key
until the needed temperature appears on the display.
• Change spin speed, if needed
Press the Spin button; the display indicates that the spin
speed can be set.
• Press the Spin button repeatedly
OR
• press the UP or DOWN key
until the needed spin speed, or Rinse hold, appears on the display.
• Select options, if needed
Press the options button. The options which are selectable
for the programme appear on the display.
Press the UP or DOWN key to navigate through the list of options.
Press the OK key to select an option; the option symbol lights up on
the control panel.
To deselect a selected option, press the OK key again.
Some options / functions can be selected by directly pressing the
button:
If such an option is not selectable for the programme, it switches off
automatically when the button is pressed.
Refer to section OPTIONS, FUNCTIONS AND INDICATORS for more
information.
6.
ADD DETERGENT
• If you do not use the Dosing Aid function, pull out the
detergent dispenser and add detergent (and additives/
softener) now, as indicated in section DETERGENT
DISPENSER.
Observe the dosing recommendations on the detergent pack. If
you have selected PREWASH or FINISH IN, observe the
recommendations in section OPTIONS, FUNCTIONS AND
INDICATORS. Afterwards carefully close the detergent dispenser.
• If you use the "Dosing Aid" function, add detergent later, after
you have started the programme. Refer to section OPTIONS,
FUNCTIONS AND INDICATORS.
• After having added detergent /additives, do not open the
detergent dispenser anymore, to avoid overflow.
7.
START PROGRAMME
• Press and hold "Start/Pause" until the button lights up
solidly; the programme starts.
• If you have selected "Dosing Aid", the washing machine will
indicate you the recommended detergent amount for your
laundry load after programme start. Follow the instructions as
indicated in section OPTIONS, FUNCTIONS AND INDICATORS /
Dosing Aid.
8.
CHANGE A RUNNING PROGRAMME, IF NEEDED
You can still change the settings while a programme is running. The
changes will be applied, provided the respective programme phase
has not finished yet.
• Press the relevant button (for example the "Spin speed" button to
change the spin speed). The display indicates that the value can
be set.
• Press the UP or DOWN key to adjust the value. For options
selectable with the options button: press UP or DOWN key to
select an option; afterwards press the OK key to confirm or
deselect the option.
The programme will continue automatically.
To change the settings of a running programme, you can also
• Press "Start/Pause" to pause the running programme
• Change your settings
• Press "Start/Pause" again to continue the programme.
9.
PAUSE A RUNNING PROGRAMME AND OPEN
THE DOOR, IF NEEDED
• Press and hold "Start/Pause" to pause a running
programme.
• Provided water level is not too high, or laundry is not
too hot, the door indicator lights up. You can open the
door, for example to add/remove laundry.
• Close the door again and press "Start/Pause" to proceed
with the programme.
10.
RESET A RUNNING PROGRAMME, IF NEEDED
• Press and hold the "On/Off" button until the display
indicates that the programme is cancelled.
The water drains, the programme ends and the door
unlocks.
11.
SWITCH OFF THE WASHING MACHINE AFTER
PROGRAMME END
• The display indicates that the cycle has ended, and the
"Door open" indicator lights up – you can take out your
laundry
• Press "On/Off" to switch off the washing machine. If you do not
switch it off, the washing machine will switch off automatically
after about a quarter of an hour after programme end, to save
energy.
• Leave the door ajar, so that the inside of the washing machine can
dry.
EN
3
Advertisement
Table of Contents
