Setting An Alarm - Radio Shack Chronosette-276 User Manual

reaches the end.
ALARM CLOCK OPERATION
SETTING THE TIME
Follow these steps to set the time.
1. Press and hold down TIME SET.
2. While you hold down TIME SET, press and hold down the appropriate
FWD or REV button to set the time.
3. Release TIME SET.

SETTING AN ALARM

The Chronosette-276 has two alarms.
radio, or tape player turn on at the specified times.
Follow these steps to set ALARM 1.
1. Press and hold down ALARM SET
The display shows the current alarm time setting and the AM/PM
indicator.
2. While holding down ALARM SET 1, press the appropriate FWD or REV
button to set the alarm time.
3. Release ALARM SET 1.
4. Set OFF/RADIO/ALARM as follows:
ALARM - the buzzer sounds at the set alarm time.
RADIO - the radio or tape player sounds at the set alarm time.
alarm indicator lights.
5. Set RADIO/TAPE (RADIO OFF) as follows:
RADIO - to turn on the radio.
TAPE - to play a tape
6. To set ALARM 2, repeat steps 1 through 5, using ALARM 2 where
You can set the alarms so the buzzer,
The