7.1.2 DISASSEMBLY
-
Removing the Case Unit(not shown)
1. Remove the Case Unit.
-
Removing the CD Mechanism Module (Fig.1)
Remove the four screws.
Disconnect the connector and then remove the CD
Mechanism Module.
-
Removing the Grille Panel Assy (Fig.1)
Remove the two screws and then remove the
Grille Panel Assy.
-
Removing the Tuner Amp Unit (Fig.2)
Remove the two screws.
Straight the tabs at three locations indicated.
Remove the screw.
Remove the three screws and then remove the
Tuner Amp Unit.
DEH-P730,P7300
CD Mechanism Module
Grille Panel Assy
Tuner Amp Unit
Fig.1
Fig.2
49