Disassembly - Pioneer XR-P460 Service Manual

XR-P360, XR-P360G
8. DISASSEMBLY
e CD DISC MANUAL REMOVAL
METHOD
Gear
Turn the gear in arrow direction to the front, and move the
cam plate to the front. When the gear is turned until the cam
plate comes to the very front position (EJECT position), the
CD disc will be pulled out.
e@ SERVOMECHANISM EXCHANGE
METHOD AND MECHANISM
ADJUSTMENT METHOD
Spring
Remove the spring and the two screws, and then remove the
disc plate. Move the cam plate to the very front position
(EJECT position). (Refer to the CD disc manual removal
method.)
Remove the spring.
Remove to the front while pulling the claw part of the cam
plate to the outside.
Raise the clamper holder lightly, slide it in arrow direction,
and remove it. When the centering plate is moved to the rear,
the four screws fixing the servomechanism become visible.
When these screws are removed, the servomechanism
assembly can be removed.
TAN and RAD adjustment are executed from above with the
clamper holder and the roller holder removed and only the
magnet clamper placed onto the CD disc.
71