Chevrolet Beat DIESEL Owner's Manual page 135

4. Attach jack handle to the jack and
attach wrench to the jack handle
correctly.
Then raise the jack to join the lift
head at the jacking position firmly.
5. Rotate the wrench checking the
correct position of jack until wheel
is clear of the ground.
6. Unscrew the wheel nuts.
7. Change the wheel.
8. Screw on the wheel nuts.
9. Lower vehicle.
10. Install the wheel wrench ensuring
that it locates securely and tighten
each nut in a crosswise sequence.
Tightening torque is 120 N.m.
Vehicle Care
11. Align the valve hole in the wheel
cover with the tire valve before
installing.
Install wheel covers.
12. Stow the replaced wheel and the
vehicle tools.
See Tools on page 126.
13. Check the tire pressure of the
installed tire and also the wheel nut
torque as soon as possible.
Have the defective tire renewed or
repaired.
131