Product Hardware Features - TRENDnet TEW-828DRU User Manual

TRENDnet User's Guide
USB 3.0/2.0 Share Ports
Plug in a USB 3.0 flash or storage drive into the SuperSpeed USB 3.0 or the USB 2.0 share
port
Guest Network
Create an isolated network for guest internet access only
Parental Controls
Control access to specific websites
One Touch Connection
Securely connect to the router at the touch of the Wi-Fi Protected Setup (WPS) button
Targeted Beamforming
Increased real-time performance by directing stronger wireless signals to your specific
location
1 GHz Processor
Extreme performance 1 GHz dual core processor optimizes networking throughput
VPN Support
Secure remote access to the router with OpenVPN support
*Maximum wireless signal rates are referenced from IEEE 802.11 theoretical
specifications. Actual data throughput and cover-age will vary depending on
interference, network traffic, building materials and other conditions. For maximum
performance of up to 1.3 Gbps use with a 1.3 Gbps 802.11ac wireless adapter. 802.11n
2.4 GHz TurboQAM speeds requires clients with TurboQAM support.
© Copyright 2015 TRENDnet. All Rights Reserved.

Product Hardware Features

Rear View
6 External High Gain
USB 3.0 Port
USB 2.0 Port WPS Button Gigabit LAN Ports 1-4 Gigabit Internet Port
No Item Description
1 USB 3.0 Port Connect USB storage devices to share over the
network via FTP or Windows® SMB/CIFS, Samba.
2 USB 2.0 Port Connect USB storage devices to share over the
network via FTP or Windows® SMB/CIFS, Samba.
3 WPS Button (Wi-Fi Push and hold this button for 3 seconds to activate
Protected Setup) WPS. The Power LED will blink when WPS is activated.
4 LAN Ports 1-4 Connect Ethernet cables (also called network cables)
from your router LAN ports to your wired network
devices.
5 Internet Port Connect an Ethernet cable from your router Internet
port to your modem.
6 On/Off Power Switch Push the router On/Off power switch to turn your
router "On" ( - ) or "Off" (O).
7 Power Port Connect the included power adapter from your router
power port and to an available power outlet.
8 Reset Button Press and hold this button for 10 seconds to reset the
router.
TEW-828DRU
Antennas
Power Port
Power Switch
Reset Button
On/Off
2