IBM L40 SX Quick Reference page 62

Select Set passwords and network server mode on the Main
2
Menu and press Enter.
Select Set power-on password and press Enter. Follow the
3
instructions on the screen.
Write down the power-on password and store it in a safe place.
4
• To change a power-on password
Turn on the computer.
1
When the password prompt
2
password, then press the key
Shift key.
Write down your new power-on password (seven characters or
3
less) and store it in a sate place.
Type the password and press Enter.
4
• To remove a power-on password
Turn on the computer.
1
When the password prompt
2
password, then press the key
Shift key.
3 Press Enter
Operating Your Computer
appears, type your current
located to the left of the right
appears, type your current
located to the left of the right
50