Directwire Examples - Audiotrak MAYA1010 Manual

MAYA1010
INPUT column is a new feature of DirectWIRE 3.0. It's used to route signals
from the card's hardware inputs. With MAYA1010, from INPUT 1 to 8 are
identical to the each left and right channels of the analog input signal. And
INPUT 9 and 10 are the left and right channels of the digital input.
MME column represents general application's I/O:
Ex.) WinAmp, WaveLab (non ASIO mode), Cakewalk, Audition, Vegas, etc.
WDM column represents Multi-MME application's I/O:
Ex.) SONAR (WDM/KS mode), PowerDVD, WinDVD, etc.
ASIO column represents ASIO application's I/O:
Ex.) Cubase, Logic, Reason, Nuendo, SONAR (ASIO mode), Samplitude, etc.
GSIF column represents GSIF applications like GigaStudio.
NOTE: Some applications support multiple driver modes.

3. DirectWIRE Examples

1) Recording from WinAmp(MME) to WaveLab(MME)
Caution; If you want to record what's played back in Winamp, but don't
want to hear the sound, you should click the OUT button in the MME
section so that it changes to "OUT"
- 23 - 23