Directwire Control Panel; Directwire Examples - Audiotrak Prodigy HD2 User Manual

AUDIOTRAK Prodigy HD2

2. DirectWIRE Control Panel

Click on DirectWIRE on the Prodigy HD2 control panel. The DirectWIRE panel window as shown
below will appear.
a) the INPUT column is a new feature of DirectWIRE 3.0. It's used to route signals from the card's
hardware inputs. On Prodigy HD2, the inputs 1 to 8 are identical to the left and right channels of the
analog input signal.
b) the MME column represents general application's I/O, for example from programs like
WinAmp, WaveLab (non ASIO mode) or Audition.
c) the WDM column represents Multi-MME application's I/O, for example from programs like
SONAR (WDM/KS mode), PowerDVD, WinDVD, etc.
d) the ASIO column represents ASIO application's I/O, for example from programs like Cubase,
Logic, Reason, Nuendo, SONAR (in ASIO mode) or Samplitude.
e) the GSIF column represents GSIF applications like GigaStudio.
f) the numbers in the column on the left represent the number of each input or output port. You can
patch the virtual cables from one point to another by draging your mouse.

3. DirectWIRE Examples

Note: Please set up DirectWIRE first before starting your audio applications.
1) recording of a stereo mix for internet broadcasting with WinAMP
15