Audiotrak MAYA1010 Manual page 16

MAYA1010
2) OUTPUT: You can change the output monitoring level on all channels
(1~8, S/PDIF) by clicking and dragging the fader bar. The number on the
bottom shows the relative amount in dB. Clicking this number enables
you to mute the channel.
H·P: Output ch 1/2 can be used for headphone output.
MIX OUT: Hear sounds from the mixer panel. Please refer to Section 6.
on page 17, for more information on the Mixer Panel. You can mix
output to ch 1/2 if you select H·P or to S/PDIF.
3) MASTER: You can adjust all input / output monitoring levels by clicking
and dragging the fader in the master control panel. Again the number on
the bottom shows you the relative monitoring level in dB. Clicking this
number enables you to mute the channel.
LINK: You can control volume of left and right channels independently by
deselecting this button.
- 16 - 16