Expansion Cabinet; Step 5-Connect The Power Cords; Step 6-Power On The X9700C And X9700Cx Components - HP StorageWorks x9720 Administrator's Manual

Expansion cabinet

1 X9700c 8
2 X9700c 7
3 X9700c 6
4 X9700c 5
5 Used by base cabinet.
6 SAS switch ports 5 through 8 (in interconnect bay 3 of the c-Class Blade Enclosure).
7 Used by base cabinet.
8 SAS switch ports 5 through 8 (in interconnect bay 4 of the c-Class Blade Enclosure).
Step 5—Connect the power cords
WARNING!
Do not disable the power cord grounding plug. The grounding plug is an important safety
feature.
Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all
times.
Do not route the power cord where it can be walked on or pinched by items placed against
it. Pay particular attention to the plug, electrical outlet, and the point where the cord extends
from the storage system.
The X9720 Network Storage System cabinet comes with the power cords tied to the cabinet.
Connect the power cords to the X9700cx first, and then connect the power cords to the X9700c.
IMPORTANT:
blocks, you must connect all the PDUs to a power source.
Step 6—Power on the X9700c and X9700cx components
Power on the X9700cx first, then power on the X9700c.
To reduce the risk of electric shock or damage to the equipment:
If your X9720 Network Storage System cabinet contains more than two capacity
Adding capacity blocks 87