Renault 2000 Megane Driver's Handbook Manual page 114

ROADBOX: REMOVING
10
7
11
12
• Route each of the rear seat belts 7
though the corresponding belt
guide 10.
• Secure the belts by fastening each
of the buckles 11 in their
corresponding catches 12.
• When refitting the seatback, make sure the top part is latched in properly. If seat covers are used, make sure
that they do not prevent the latch for the seatback from locking into position.
• When moving the bench seat, make sure the seat belt catches 14 are in position correctly before folding the
seat base.
When refitting the rear bench seat, ensure that the seat belts are correctly positioned.
(continued)
A
• Tighten bolts 1 as far as they will
go.
• Ensure the seatback is held in
position securely.
1
13
1
• Position seat base B and tighten
the two bolts 13 as far as they will
go.
• Ensure the seat is locked in
position securely.
14
B
13
3.33