Changing Shortcuts - Brother DCP-J172W User Manual

Chapter 1
f
Press s or t to display the available
settings for the mode you chose in
step e, and then press the setting you
want to change.
g
Press s or t to display the available
options for the setting, and then press
the new option you want to set.
Repeat steps f and g until you have
chosen all the settings for this Shortcut.
h
When you have finished choosing
settings, press OK.
i
Enter a name for the Shortcut using the
keyboard on the Touchscreen. (For help
entering letters, see Entering Text
on page 74.)
Press OK.
j
Press s or t to review and confirm the
displayed list of settings you have
chosen.
Do one of the following:
 Press Yes to save your Shortcut. Go
to step k.
 Press No to return to step f.
k
Read the information on the
Touchscreen, and then confirm it by
pressing OK.
l
Press .
NOTE
-Blank- appears when accessing
through Settings.
10

Changing Shortcuts

You can change the settings in a Shortcut.
a
Press (Settings).
b
Press s or t on the Touchpanel to
display Shortcut Settings.
Press Shortcut Settings.
c
Press the Shortcut
you want to change.
d
Press Change.
e
Read the information on the
Touchscreen, and then press Yes to
confirm.
f
Press s or t to display the current
settings for this Shortcut, and then press
the setting you want to change.
g
Press s or t to display the available
options for the setting, and then press
the new option you want to set.
Repeat steps f and g to change other
settings as needed.
h
When you have finished changing
settings, press OK.
i
To edit the name, hold down
delete the current name, and then enter
a new name using the keyboard on the
Touchscreen. (For help entering letters,
see Entering Text on page 74.)
Press OK.
j
Press s or t to review and confirm the
displayed list of settings for this
Shortcut, and then press Yes to save
your changes.
k
Read the information on the
Touchscreen, and then confirm it by
pressing OK.
1
, or that
to