Cleaning The Main Chargers And Led Print Heads - Toshiba E studio 2010C Quick Start Manual

Cleaning the main chargers and LED print heads

If the inside of the main chargers and the print heads of the LED are dirty, the dirt will be transferred to the copied
image. Clean them following the procedure below.
1
Open the front cover.
2
3
2
1
Pull out the cleaner until the mark appears and
return it. Repeat this 3 times for each of the 4
colors.
4
3
1
2
Put your fingers in the waste toner box front
grooves and take it out toward you pushing down
the top latch, and then clean the LED print heads.
For instructions on how to clean the LED print
heads, see the following:
& P.37 "Replacing Waste Toner Box" (Steps 2 to 6)
4
Close the front cover pressing both edges.
Regular Cleaning
1

4