Getting Ready; Names And Functions Of Parts - Sharp Aquos SHL23 Basic Manual

Getting Ready

Names and Functions of Parts

■ Front/Left and Right Side
A Charger terminal
B Grip sensor
Hold the product (touch the sensor areas on both
sides at the same time) to turn the screen on or
minimize the volume and make the product vibrate
during an incoming call or while the alarm is ringing.
40
• Even if you release your hand from the sensor
areas, the screen is kept turned on and it is not
turned off.
C In camera lens
D Proximity sensor/Light sensor
Proximity sensor prevents inadvertent operations of
the touch panel during a call.
Light sensor detects the ambient brightness and
adjusts the brightness of display.
E Infrared port
F Display (Touch panel)
G ud Volume up/down key
Adjust the volume.
Long touch "u" on the Welcome Sheet (Lock
Screen) to turn on the mobile light.
Long touch "d" on the home screen or Welcome
Sheet (Lock Screen) to set/disable the manner
mode.
H Earpiece (Receiver)
I Charging/Incoming indicator
J f Power key
Turn the screen on/off.
Hold it down to turn on/off the power, set the manner
mode, etc.