Advertisement
2. How to Install
Important! DO NOT install the TPL-202E until instructed to do so
For Windows Users
1. Insert the Utility CD-ROM into
your computer's CD-ROM Drive
and then click Install Utility.
2. Follow the InstallShield Wizard
instructions and then click Finish.
3. Copy down the 12 digit device
password for each TPL-202E.
Note:
1. DO NOT plug the TPL-202E into a power strip or surge protector.
2. In order for the TPL-202E to see each other, each unit must be on the same
circuit breaker.
3. A maximum of 16 TPL-202E can be networked.
2
English
Advertisement
