Troubleshooting - ZyXEL Communications ZyAIR B-220 Quick Installation Manual

COLOR STATUS
Blue On
Blink (fast)
Blink (slow)
PROBLEM
Windows does not
auto-detect the
ZyAIR.
The ZyAIR has a successful connection to an access point.
The ZyAIR is sending or receiving data.
The ZyAIR is ready but not connected to an access point.

Troubleshooting

Make sure the ZyAIR USB connecter is inserted into the
computer USB port properly and then restart your computer.
Check the LED on the ZyAIR.
Perform a hardware scan by clicking Start, Settings, Control
Panel and double-clicking Add/Remove Hardware. (Steps
may vary depending on the version of Windows).
Follow the on-screen instructions to search for the ZyAIR and
install the driver.
Use the Device Manager window to check for possible
hardware conflicts.
Click Start, Settings, Control Panel, System, Hardware and
then click Device Manager. Verify the status of the ZyAIR
under Network Adapter. (Steps may vary depending on the
version of Windows).
Install the ZyAIR in another computer.
DESCRIPTION
CORRECTIVE ACTION
8