OBJ_BUCH-1196-005.book Page 10 Tuesday, October 28, 2014 11:19 AM
10 | English
The battery is supplied partially charged. To ensure full
battery capacity, completely charge the battery in the
battery charger before using for the first time.
Read the operating instructions of the battery charger.
Apply the power tool to the screw only when it is
switched off. Rotating tool inserts can slip off.
Adjust the gear switch only when the machine is at a
complete stop.
If the gear switch cannot be pushed to the stop, turn
the drill chuck a little.
To save energy, only switch the power tool on when using
it.
The battery charge-control indicator indicates the
charge condition of the battery for a few seconds when
the On/Off switch is pressed half or fully through. It
consists of a three-colour illuminating LED.
LED
Continuous lighting, green
Continuous lighting, orange
Continuous lighting, red
Flashing light, red
Symbols
The following symbols are important for reading and under-
standing the operating instructions. Please take note of the
symbols and their meaning. The correct interpretation of the
symbols will help you to use the machine in a better and safer
manner.
Symbol
Meaning
PSR 10,8 LI-2: Cordless Drill Driver
Grey-marked area: Handle (insulated
gripping surface)
Article number
Read all safety warnings and all
instructions
Before any work on the machine itself,
remove the battery
Movement direction
Reaction direction
1 609 92A 0UX | (28.10.14)
Symbol
Capacity
U
≥ 66%
n
1
0
33—66%
n
2
0
11—33%
M
≤ 11%
Ø
Ø
L
wA
L
pA
K
a
h
T
1
T
2
Delivery Scope
Cordless Drill/Driver.
Battery, application tools and other accessories shown or de-
scribed are not part of the standard delivery scope.
Meaning
Right/left rotation
Drilling
Low speed
High speed
Switching On
Switching Off
Rated voltage
No-load speed (1st gear)
No-load speed (2nd gear)
Maximum torque according to
ISO 5393
Metal
Wood
Drilling diameter, max.
Max. screw dia.
Chuck clamping range
Weight according to EPTA-Procedure
01/2003
Sound power level
Sound pressure level
Uncertainty
Vibration total value
Permitted ambient temperature during
charging
Permitted ambient temperature during
operation* and storage
* Limited performance at temperatures <0 °C
Recommended batteries
Recommended chargers
Bosch Power Tools