Edge Cleaning; Overload Protection; Filter Cleaning System; Upper And Lower Cord Storage Hooks - Panasonic mc-ul592 Operating Instructions Manual

Edge Cleaning

Overload Protection

Overload Protection
Reset Button

Filter Cleaning System

Upper and Lower Cord Storage Hooks

Upper Cord
Storage Hook
Mains Lead
Hook
Mains Lead
Lower Cord
Storage Hook
(Carrying Handle)

Auto Beater Bar Stop

Beater Bar : On Beater Bar : Off
• Edge cleaning feature enables improved cleaning of carpets near walls
and furniture.
• The overload protection inside the nozzle stops the nozzle motor when
the beater bar jams to prevent belt breakage.
NOTE:
The vacuum cleaner motor will continue to run.
TO CORRECT PROBLEM:
• Switch the unit off.
• Unplug the mains lead.
• Check nozzle areas for excessive lint build up or jamming.
• Clean jammed area.
TO RESET:
• Press reset button on top of the nozzle. Plug in and turn on vacuum
cleaner.
• Rotate the filter refresher 2 full turns before and after cleaning.
• This will remove fine dust from the filter for improved and long lasting
suction power.
Filter
Refresher
• While storage the vacuum cleaner, turn the upper cord storage hook in
the upright position and wind the mains lead around the upper and lower
cord storage hooks as shown.
• In order to have a proper arrangement of mains lead while storage the
vacuum cleaner, it is advisable to use the mains lead hook as shown in
the diagram.
• This model is fitted with an auto beater bar stop.
• While operating the vacuum cleaner at the "CARPET" position, the beater
bar will automatically stop rotating when the body of the vacuum cleaner
was put at the upright position as shown.
7