Check Door/Frame Dimensions; Locate Programming And User Codes - Schlage SENSE Installation Instructions Manual

5

Check door/frame dimensions.

• Measure the dimensions shown. If your door
dimensions do not match, you will need to
change your door preparation. Go to answers.
schlage.com
for drilling instructions.
»
If your door is thicker than 1C\v", you will need a
thick door kit. Please call Customer Service:
»
Mark your crossbore and backset measurements on this page. You will need
these measurements for installation. Either measurement is normal.
Crossbore
Diameter
2Z\," (53 mm)
OR
1Z\x" (38 mm)
If your crossbore is
1Z\x", see
Removing Spacer
on page 14.
This lever represents
your current knob or
lever, which may be
already installed.
6
Locate programming and access codes.
Codes are located on the stickers on the front of the User's Guide. You will need
these codes to operate the lock. They are also located on the back of the Alarm
Assembly.
»
Do NOT remove these stickers from the back of your lock! If you lose your codes,
you can reset your lock back to these default codes.
»
The HomeKit setup code is used to connect your lock to your iPhone, iPad, or
If you have questions about any part of
installation or programming, don't return the
iPod touch.
Touchscreen Deadbolt with Alarm to the store.
Our Schlage Customer Service representatives
are ready to help.
Toll-Free: 1.888.805.9837
Live Chat: schlage.com
To learn more about this
product, scan the code with
your smartphone.
Download the app at
scanlife.com.
If you have questions about any part of
Default Codes
installation or programming, don't return the
Touchscreen Deadbolt with Alarm to the store.
Our Schlage Customer Service representatives
are ready to help.
Toll-Free: 1.888.805.9837
installation or programming, don't return
Live Chat: schlage.com
the Keypad Lock to the store. Our Schlage
Customer Service representatives are ready
To learn more about this
to help.
product, scan the code with
Default Programming Code
Toll-Free: 1.888.805.9837
your smartphone.
Live Chat: schlage.com
Default User Codes
Download the app at
scanlife.com.
Default Codes
SCHLAGE
00000000
BE469 0000000-000
Firmware Ver.: xxx-x 00000000
Default Programming Code
Programming Code: 000000
User Code A: 0000
Default User Codes
User Code B: 0000
FCC ID: xxxxxxxx
Ingersoll Rand (NYSE:IR) advances the quality of life by creating and
Ingersoll Rand (NYSE:IR) advances the quality of life by creating and
and our family of brands—including Club Car®, Ingersoll Rand®,
Schlage®, Thermo King® and Trane® —work together to enhance
Backset
2C\," (60 mm)
2C\v" (70 mm)
Door Thickness
1C\," to 1C\v"
One label has
installation or programming, don't return
your default
the Keypad Lock to the store. Our Schlage
Customer Service representatives are ready
Programming
to help.
and Access
Toll-Free: 1.888.805.9837
codes. The other
Live Chat: schlage.com
label has your
HomeKit setup
code.
SCHLAGE
00000000
BE469 0000000-000
Firmware Ver.: xxx-x 00000000
Programming Code: 000000
User Code A: 0000
User Code B: 0000
FCC ID: xxxxxxxx
THIS IMAGE DOES NOT
REFLECT THE CURRENT STATE
OF THE CODE LABELS.
Toll-Free Calling From:
U.S.A.: (888) 805-9837
Canada: (800) 997-4734
Mexico: 018005067866
OR
1" (25 mm)
Hole
Minimum 5"
(127 mm)
Door Stop
Hole at least
1" (25 mm)
deep.
5