Troubleshooting - Maytag LAV3600AWW Use & Care Manual

Troubleshooting

Leaks Water
Is Noisy
Fills with the Wrong
Temperature Water
For further assistance contact Maytag Services
U.S. Customers using TTY for deaf, hearing impaired or speech impaired, call 1-800-688-2080.
• Make sure hose connections are tight.
• Make sure end of drain hose is correctly inserted and secured to drain facility.
• Avoid extended soaking – soak for 30 minutes or less.
• Avoid overloading.
• Be sure washer is leveled properly as outlined in installation manual.
• Weak floors can cause vibration and walking.
• Be sure rubber feet are installed on leveling legs.
• Operating sounds will vary depending on agitation speed.
• Turn both faucets on fully.
• If equipped with a temperature selector knob, be sure it is set directly on a
temperature setting and not between settings.
• Make sure temperature selection is correct.
• Make sure hoses are connected to correct faucets and inlet connections. Be sure
water supply is regulated correctly. Flush water line before filling washer.
• Check the water heater. It should be set to deliver a minimum 120° F (49° C) hot
water at the tap. Also check water heater capacity and recovery rate.
• Disconnect hoses and clean screens. Hose filter screens may be plugged.
U.S. 1-800-688-9900 or Canada 1-800-688-2002.
SM , Maytag Customer Assistance:
10