NEC NP1000 Network Setup Manual page 23

Wired and wireless network setup guide

Hide thumbs Also See for NP1000:

Table of Contents

Select "WEP" page (if necessary).

Proceed to step

<1> Use the

SELECT /

button to highlight the "WEP" tab.

The "WEP" page will be displayed.

Select "WEP".

Select whether WEP (encryption) is performed or not.

To perform WEP (encryption), set an encryption key.

• Disable ................... WEP (encryption) is not performed. There is a danger that the contents of

• 64 bit ...................... 64-bit data is used as an encryption key of WEP.

• 128 bit .................... 128-bit data is used as an encryption key of WEP.

• 152 bit .................... 152-bit data is used as an encryption key of WEP.

Security is reinforced as the number of bits is increased.

Select "Key Select" (only when WEP is selected).

If "64 bit", "128 bit", or "152 bit" is selected from "WEP", select which of the following encryption keys,

"Key 1" to "Key 4", is to be used.

if WEP is not set.

button to select the "Network Type" tab, and press the

communication are monitored.

5. Setting the LAN Setting of Projector

Table of Contents

Np2000