NEC NP1000 Network Setup Manual page 22

5. Setting the LAN Setting of Projector
11
Select "Mode" (if necessary).
The communication mode of the SSID selected in "Site Survey" are automatically selected.
The settings can be changed by moving the highlight to the "Mode" field and pressing the
button.
• "Infrastructure" .............. This is selected if communication is performed with two or more devices
• "802.11 Ad Hoc" ............ This is selected to perform peer-to-peer communication between the
Example of connection when
"Mode" is "Infrastructure"
Access
point
Wired LAN
Example of setting 2
12
Select "Channel" (if necessary).
Select a channel for communication using wireless LAN.
If neighboring channel numbers are used in one area, the speed of wireless LAN communication
decelerates. To avoid such a situation, select discrete channel numbers.
The setting upon shipment is "Automatic".
20
connected by wired or wireless LAN via an access point.
projector and a personal computer by using only wireless LAN.
Example of connection when
"Mode" is "802.11 Ad Hoc"