Table of Contents
Advertisement
Command Codes (continued)
No.
Function
33
Lamp Reset
34
S-VIDEO
35
Brightness
36
Contrast
37
Color
38
Tint
39
Sharpness
40
Audio Volume
41
Fine Picture
42
Picture Adj
43
H Position
44
V Position
WARNING
TO PREVENT FIRE OR SHOCK, DO NOT EXPOSE THIS
UNIT TO RAIN OR MOISTURE. DO NOT USE THIS UNIT'S
GROUNDED PLUG WITH AN EXTENSION CORD OR IN
AN OUTLET UNLESS ALL THREE PRONGS CAN BE
FULLY INSERTED. DO NOT OPEN THE CABINET. THERE
ARE HIGH-VOLTAGE COMPONENTS INSIDE. ALL SER-
VICING MUST BE DONE BY QUALIFIED NEC SERVICE
PERSONNEL.
Code
Data
Description
27H
No
Lamp usage hour is reset to 0
C6H
No
Same as remote
60H
Yes
0 to 63
62H
Yes
0 to 63
64H
Yes
0 to 63
66H
Yes
-32 to +31(E0 to 1F)
68H
Yes
0 to 3
6AH
Yes
0 to 63
6EH
Yes
0 to 15
70H
Yes
0 to 255
72H
Yes
-32 to +31(E0 to 1F)
74H
Yes
-32 to +31(E0 to 1F)
RF Interference
WARNING
The Federal Communications Commission does not allow any
modifications or changes to the unit EXCEPT those specified by
NEC Technologies in this manual. Failure to comply with this
government regulation could void your right to operate this equip-
ment.
This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a commercial installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
61
2
Advertisement
Table of Contents
