Operation; Connecting The Power Cable And Turn On The Projector - NEC LT150 User Manual

3.OPERATION

Connecting the Power Cable and Turn on the Projector

Before you turn on your projector, ensure that the computer or video
source is turned on and that your lens cap is removed.
1
Connect the supplied power cable to the projector.
O
ID E
S -V
B L
R O
R G
N T
C O
P C
D IO
A U
Plug the supplied power cable in the wall outlet. The projec-
tor will go into its standby mode and the power indicator will
glow orange.
2
Turn on and off the Projector
AUTO
SOURCE
ADJ.
Vol.
SELECT
Vol.
PIC.
POINTER
MUTE
MAGNIFY
HELP POWER
RD-366E
To turn on the projector:
Only after you press the "POWER" button on the projector
cabinet or the remote control will the power indicator turn to
green and the projector become ready to use.
NOTE: To turn the projector on by plugging in the power cable, use
the menu and enable the "Auto Start" feature. (See page E-42.)
NOTE: Immediately after turning on the projector, screen flicker may
occur. This is not a fault. Wait 3 to 5 minutes until the lamp lighting
is stabilized.
I N
A C
R D
C A
P C
B
U S
E O
V ID
POWER ON/STAND BY button
Indicator
R G
B
Power button
To turn off the projector:
First press the "POWER" button on the projector cabinet or
the remote control for a minimum of two seconds. The power
indicator will glow orange. After the projector turns off, the
cooling fans keep operating for 90 seconds.
NOTE: Do not disconnect the power cable during this time. Then,
unplug the power cable. The power indicator will go out.
Status of indicator light: turn on
stand by
STATUS
POWER
steady orange light
flashing 3 to 5 minutes
STATUS
POWER
flashing green light
Status of indicator light: turn off
ON
STATUS
POWER
steady green light
cooling down
STATUS
POWER
change to flashing
green light
3
Adjust a Projected Image
Select the Computer or Video Source
SOURCE
Vol.
SELECT
Vol.
POINTER
E–27
ON/STAND BY
steady light
STATUS
POWER
steady green light
ON/STAND BY
press a minimum of
two seconds
stand by
STATUS
POWER
steady orange light
AUTO
ADJ.
PIC.
MUTE