Table of Contents
Advertisement
Wiring Diagram
VCR, DVD Player or LaserDisc Player
RGB Signal cable (supplied)
To mini D-Sub 15-pin connector on the
projector. It is recommended that you use a
commercially available distribution amplifier if
connecting a signal cable longer than the
supplied cable.
Macintosh
(Desktop type or notebook type)
NOTE: When using with a notebook PC, be sure to connect between the projector and the notebook PC before turning on the power to the notebook PC. In most
cases signal cannot be output from RGB output unless the notebook PC is turned on after connecting with the projector.
NOTE:
* If the screen goes blank while using your remote control, it may be the result of the computer's screen-saver or power management software.
* If you accidentally hit the POWER button on the remote control, wait 90 seconds and then press the POWER button again to resume.
NOTE: If using video, S-video, or audio cables, the cables should be 3 m (9.8 feet) or shorter.
To video, S-video, and audio
inputs on the projector.
AUDIO
RGB
S-VIDEO
PC CONTROL
IBM VGA or Compatibles
(Desktop type or notebook type)
E–21
Document Camera
VIDEO
Optional Component V cable
DVD Player (with component output)
Advertisement
Table of Contents
