Description Of Menu Items; Image Adjustment - NEC DT100 User Manual

Description of Menu Items

Each menu display and items and functions to be set are described. Refer to "Basic Opera-
tion" on page E-37 for information about setting.

◆ Image adjustment

Image adjustment
Contrast 0
0
Brightness
Red 0
Blue 0
Standard
<Image adjustment menu>
◆ Image adjustment (when OHP is selected)
Image adjustment
Gamma
PHOTO TEXT
Red 0
Blue 0
Standard
<Image adjustment menu>
◆ Sync adjustment (Only when PC is selected as an input device)
Sync adjustment
Clock 0
Phase 0
9
Horizontal
Vertical 15
Standard
<Sync adjustment menu>
◆ Setting
Setting
Input signal 1024 X 768 48.2KHz
Lamp usage time 0H
Keystone 0
Auto power off O N
Start-up display O N
Standard
<Setting menu>
NOTE
• In the [Setting] menu, the input signals currently set and the accumulated used time of the lamp appears for your
confirmation.
E-34
Menu item
Contrast
Brightness
Red
Blue
Quit
Menu item
/
Gamma
Red
Quit
Blue
Menu item
Clock
Phase
Horizontal
Quit
Vertical
Menu item
60Hz
Keystone
Auto power off
/ OFF
/ OFF
Quit
Start-up display
Description
Adjust the contrast of the projected screen.
Adjust the brightness of the projected screen.
Change the depth of red.
Change the depth of blue.
Setting
PHOTO/TEXT
"TEXT" is adjusted according to
text materials and "PHOTO", to
photo materials. Select as you like.
Change the depth of red.
-100 to +100
Change the depth of blue.
-100 to +100
Setting
-100 to +100
Adjust the horizontal size of the
image.
-100 to +100
Adjust noises and flicker.
–82 to +100 Adjust the position of the image
horizontally.
–70 to +100
Adjust the position of the image
vertically.
Setting
Compensate keystoning.
-100 to +100
Set the auto power off to ON or
ON/OFF
OFF. When Auto power off is set to
ON, the unit enters the standby
mode automatically when no signal
arrives for a predetermined time
(about 15 minites).
ON/OFF
Set the logo display to appear or
not when the lamp turns on.
Description
Description
Description