Table of Contents
Advertisement
● Typical Connection Examples
Insert the connector and tighten the screws.
To RGB input connector
of monitor
● IBM Notebook Models and Compatible
IBM PC/AT and compatibles
NOTE
Connect the Supplied signal cable, then use the PC's software to check the external CRT output and internal LCD
output status and select the correct mode.
Unless in external CRT output mode, no signal will be output.
● IBM Desktop Models and Compatible
IBM PC/AT and compatibles
NOTE
Connect only the Supplied signal cable if you are connecting the PC directly to your projector without using the
PC's monitor.
DT100 terminal panel
S-VIDEO
TEST
The type of connector cable varies
according to the type of PC.
Signal cable
(supplied)
Monitor cable
Signal cable
(supplied)
How to Connect Your Projector
V
L
R
OUT
IN
VIDEO-IN
PC-AUDIO
PC-OUT
PC-IN
To analog RGB
outputs of PC
To PC-IN
connector
To PC-OUT
connector
To PC-IN
connector
To Audio
To speaker
outputs of PC
input
DT100
DT100
E-23
Advertisement
Table of Contents
