Panasonic Viera TX-P42VT20E Operating Instructions Manual page 17

To view the contents of the Frame Sequential format (ex. 3D-compatible Blu-ray Disc, etc.) with
3D effect
Connect the 3D-compatible player via an HDMI cable (p. 9) and playback the contents.
●
Use fully wired HDMI compliant cable.
●
For the settings of the player, read the manual of the player.
●
If input mode is not switched automatically, select the input mode connected to the player.
●
If you use the non 3D-compatible player, the images will be displayed without 3D effect.
To view the contents or programmes of 3D formats other than Frame Sequential with 3D effect.
Match the picture format in "3D Picture Format" (p. 19) before viewing.
●
You can view "Side by Side" and "Top and Bottom" with 3D effect even if you use the non 3D-compatible player.
●
Please consult the suppliers of contents or programmes for availability of this service.
●
You can also view 3D images in photo / video mode in Media player and video mode in DLNA.
To view 2D images with 3D effect
Use a 2D-to-3D conversion function
Turn the 3D Eyewear on
●
Press the power button on the 3D Eyewear for about 1 second. (p. 15)
Put on the 3D Eyewear
●
If the 3D Eyewear slips out of place, hold it in place using the specialised band, and adjust the length of the
band. (p. 16)
Watch the 3D images
●
Safety precautions will be displayed when you first watch the
3D image. Select "Yes" or "No" to continue to view 3D images.
If you select "Yes", this message will be displayed again
in the same condition after Mains power On / Off switch is
next turned On. Select "No" if you do not wish to display this
message again.
■
To turn the 3D Eyewear off
After using the 3D Eyewear, press the power button on the 3D Eyewear for about 1 second to turn it off. (p. 15)
Note
●
The 3D image or 3D effect may not be available while multi window is active, VIERA CAST home screen is
displayed or Ext Rec. of Timer Programming / Direct TV Recording is in progress. As for the contents of the
Frame Sequential format, no images will be displayed in these conditions.
●
If the room is lit by fluorescent lights (50 Hz) and light appears to flicker when using the 3D Eyewear, switch off
the fluorescent light.
●
3D content will not be correctly visible if the 3D Eyewear is worn upside down or back-to-front.
●
Do not wear the 3D Eyewear when watching anything other than 3D images. Liquid crystal displays (such as
computer screens, digital clocks or calculators, etc.) may be difficult to see while wearing the 3D Eyewear.
●
Do not use the 3D Eyewear as sunglasses.
●
3D effects may be perceived differently depending on the person.
If the 3D Eyewear is placed outside the available area for about 5 minutes, the 3D Eyewear will be
turned off automatically.
: Available area to use the 3D Eyewear
Approx.
35°
3.2 m
View from the top
Note
●
The range may be shortened depending on the obstacles between the infrared sensors on the TV and the 3D
Eyewear, the dirt of the infrared sensors or the surrounding environment.
●
If you do not look toward the TV screen for a while when viewing 3D images, the 3D Eyewear may be turned off
automatically even if in the available area.
To view the 3D images
"2D→3D" mode in "3D Picture Format" (p. 19)
Available range for the 3D Eyewear
Approx.
35°
3.2 m
Approx.
3.2 m
Example:
Safety Precautions
To enjoy 3D images safely and comfortably, please read the Operating Instructions fully.
Please stop using the 3D Eyewear immediately, if you feel tired, are not feeling well or
experience any other uncomfortable sensation.
Always put the 3D Eyewear in the case provided after use.
Would you like to display this message again later?
Yes
Approx.
3.2 m
20°
20°
View from the side
No
17