Terminal Panel Features - NEC MT1056 User Manual

Terminal Panel Features

1 2
USB
MOUSE
PC CONTROL
OUTPUT
5
1. USB Terminal
Connect a commercially available mouse that supports USB. You can
operate the menu or PC Card Viewer with the USB mouse via this
terminal.
Note that this terminal is not used with a computer and that there may
be some brands of USB mouse that the projector does not support.
2 PC Card Slot
Push up and open the cover to access this slot. Insert a PC card here.
3. PC Card Access Indicator
Lights while this indicator light shows that data is being.
4. PC Card Eject Button
Press to eject a PC card partially.
5. PC Control Port (Mini DIN 8 Pin)
Use this port to connect your PC to control your projector via a serial
cable. This enables you to use your PC and serial communication pro-
tocol to control the projector. The NEC optional serial cable is required
to use this port. Also PC Control Utility 1.0 included in the supplied CD-
ROM must be installed on your PC.
If you are writing your own program, typical PC control codes are on
page E-55.
A cap is put on the port at the factory. Remove the cap when using the
port.
6. Mouse Output Port (Mini DIN 8 Pin)
Use this port to operate your computer's mouse functions from the
remote control.
7. Remote Control Input Jack
Connect your remote control cable here for wired operation.
8. Audio Monitor Output Mini Jack
Connect additional external speakers here to listen to audio coming
from your computer, Video or S- Video input.
RGB Monitor Output Connector (Mini D-Sub 15 pin)
You can use this connector to loop your computer image to an external
monitor from the RGB input source.
9. RGB Audio Input 1 Connector
This is where you connect RGB audio output from a computer or an-
other RGB source.
RGB Input 1 Connector (Mini D-Sub 15 pin)
Connect your PC or other RGB equipment. Use the signal cable that's
supplied to connect to a PC.
3
4
REMOTE
CONTROL
6
INPUT
7
E – 9
U S
B
C C
O N
14
AUDIO
8
AUDIO
9
AUDIO
10
S-VIDEO
11
10. RGB Audio Input 2 Connector
This is where you connect RGB audio output from a computer or an-
other RGB source.
RGB Input 2 Connector (Mini D-Sub 15 pin)
Connect your PC or other RGB equipment. Use the signal cable that's
supplied to connect to a PC.
11. S-Video Input Port
Here is where you connect the S-Video input from an external source
like a VCR.
12. Left Channel/Mono Audio Input Jack (RCA)
This is the left channel audio input for stereo sound coming from video
equipment or audio system. This also serves as your monaural audio
input. (Video and S-video only)
Right Channel Audio Input Jack (RCA)
This is the right channel audio input for stereo sound. (Video and S-
video only)
NOTE: When using two Video sources simultaneously, the Left Channel Audio
Input jack is available for the S-Video source only and the Right Channel Audio
Input jack is available for the composite video source only.
13. Video Input
Connect a VCR, DVD player, laser disc player, or document camera
here to project video.
14. Built-in Security Slot (
This security slot supports the MicroSaver
®
MicroSaver is a registered trademark of Kensington Microware
Inc. The logo is trademarked and owned by Kensington Microware Inc.
T R
O L
M O
U S
P C
O U
E - C A
T P
U T R D
R E
M O
C O
N T
R
I N P
U
RGB MONITOR
OUTPUT
RGB INPUT 1
RGB INPUT 2
L / MONO
R
VIDEO
12 13
)
®
Security System.