Table of Contents
Advertisement
W
95/98
INDOWS
About Color Control Options
During the PostScript 3 for Windows 95/98 driver
installation, you have the option of installing a driver using
Microsoft Image Color Matching (ICM) technology or a
driver using NEC's color matching method. The driver using
NEC's color matching method is the default and
recommended driver.
The ICM based driver calibrates the colors with those
actually seen on the print client's monitor. The NEC based
driver calibrates the colors with those described by the NEC
Color Table located inside the printer.
The choice can be made when the Select Components dialog
box appears during installation. Simply highlight the Printer
Drivers Win95 item, then click Change to open the Select
Subcomponents dialog box. The ICM based driver can be
selected there. However, when the ICM based driver is
installed, you can still choose between ICM based or NEC's
color matching printing methods from the Color Control
options located in the Graphics tab of the driver.
Installing Printer Software
Follow these steps to use the SuperScript Installer in
Windows 95/98.
1.
Insert the SuperScript 4600N CD into the CD-ROM drive.
2.
The Installer will launch automatically.
3.
Follow the instructions displayed on the computer
monitor.
4.
At the Setup Type window, select the Easy/Local
installation option. At this point, you may click Change if
you want to install the ICM based driver described
above, otherwise, click Next to continue installing the
default driver.
5.
When installation is complete, restart Windows.
note:
Pure binary data is not supported by PostScript
when a computer is locally connected (directly connected
using a parallel cable) to the printer. To assure
communications between the computer and the printer,
go to the PostScript tab of the driver, click
34
SuperScript 4600N — User's Guide
Printing a Document
You can do this using the print command of the application
used to create your document.
1. Open a document you wish to print.
2. Select Print from the File menu. The Print dialog box
3. Select the options you want in the Print dialog box,
4. When the options are selected, click OK to print the
Accessing a Printer Driver
You can access the printer driver from your application, or
the Windows Printer folder.
From your application
Different applications have different methods for accessing
the Printer Setup. Below is one common example. If it does
not work with your application, consult your software
manual.
1. Select Print from the File menu of your application.
2. In the Print dialog box that appears, click the Name pull-
3.
From the Printers folder
1.
2.
3.
Changing Settings in the Printer Driver
In the Properties folder, you simply point and click to change
printer settings.
1. Select a category of settings that you want to change by
Advanced
to
2. Click to select new settings in the property sheet.
open the PostScript Options dialog box, then make sure
the Pure Binary Data radio button is clear.
appears.
including the number of copies and page range.
document.
down menu and select a printer from the list.
Then click the Properties button in the Print dialog box
to display the printer driver.
Press the Start button and point to Settings in the Start
pop-up menu. In the menu that appears, click Printers.
In the Printers folder, select the printer driver you wish to
view.
From the File menu, select Properties.
clicking its name tab.
Advertisement
Table of Contents
