Scanner Copy Feature; Setting Up The Scanner - NEC SuperScript 4600N User Manual

S C
CANNER OPY
The printer works with the Umax Astra
1220S scanner.

Setting Up the Scanner

Before you can print, you must set up the printer to work
with the scanner.
1. Make sure the scanner is not plugged into the power and
the printer is turned OFF.
2. Plug the SCSI cable from the scanner to the SCSI port on
the Interface Panel of the printer (A).
note:
The SCSI scanner cable can also be plugged into
the Zip drive SCSI port if a Zip drive is already connected
to the printer. Set the Zip drive terminator to OFF when
attaching the scanner (B).
A
F
EATURE
1200S and Astra
®
3. Attach the SCSI terminator provided with the scanner to
the SCSI port of the scanner. Refer to the scanner's
®
documentation on how to attach the terminator.
4. Locate the SCSI ID switch on the back of the scanner.
5. With a small screw driver gently turn the SCSI ID switch
to 4, the usual factory default is 5 (C).
6. Turn the scanner, Zip drive if present, and then printer
ON.
Caution!
Do not plug in the scanner while the printer
is turned ON.
B
C

Scanner Copy Feature

69