Table of Contents
Advertisement
Service Manual
Model No.: LET32H320 LET42H320
CONNECT YOUR PC TO THE TV
You can use your TV as a monitor for your personal computer by connecting it with a VGA cable (not
supplied).
1 Read your computer user guide and check it has a VGA connector.
2 Turn the power off on your TV and PC.
3 onnect a D type 15-pin VGA interface cable to the VGA video interface connector on the PC.
Connect the other end of the cable to the PC interface connector on the TV. Tighten the screws on
the VGA connectors and connect the audio cable (not supplied) to the audio input socket on the back
of the TV.
4 Turn on the power of the TV ¿ rstly and then the PC.
5 Press the button on the TV or TV remote control to set the video input mode to VGA.
6 Once the image shows, if there is noise present, change the VGA mode to another resolution,
change the refresh rate to another rate or adjust the brightness and contrast on the menu until the
picture is clear.
CONNECT A DVD PLAYER TO YOUR TV
Connect the DVD video outputs (Y, P
1 Turn on the DVD player and insert a DVD.
2 Press the button to select .
3 Refer to the DVD player user guide for operating
CONNECT A DVD PLAYER OR VCR TO YOUR TV
This is the way for connectting a DVD player or VCR to your TV. Make sure that both the TV
and DVD player or VCR are switched off before you connect them.
1 Connect the AV DVD/VCR outputs to the AV IN socket on your TV.
2 Press the
SOURCE
SCART INPUT
1 Connect the scart lead from the external device (DVD player, Set-top box or games console)
to the TV scart socket.
2 Press the
SOURCE
3 Press the PLAY button on the external device.
HDMI input
1 Connect the cable from the HDMI device to the TV HDMI socket.
2 Press the SOURCE button to select HDMI mode.
3 Refer to the HDMI device user guide for how to operate.
20
, P
) to the COMPONENT (Y, P
b
r
button on the TV to set the video input mode to AV.
button to select SCART mode.
, P
) IN socket on your TV.
b
r
instructions.
DVD
Advertisement
Table of Contents
