Preparing Your Remote Control; Installing The Batteries; Caution; Getting Started Setting Up - Haier LET32T1000HF Instruction Manual

Getting started
Preparing your remote
control

Installing the batteries

Place the remote control face down, then open the
cover of the battery compartment.
Install two AAA batteries. (The + and - symbols on
the battery must match with the symbols on the
remote).
Close the cover of the battery compartment.

Caution

Confirm that there are no objects between the remote
control and the remote sensor on the TV set.
Sunshine or other strong light will interfere with the
signal sent by the remote control. Avoid using near
special fluorescent lights or neon signs.
Do not store the remote control in hot or damp places as
this may damage the remote.
Please use two AAA 1.5V batteries. Do not mix battery
types. Install the batteries at the correct polarities. Do
not use rechargeable batteries. If your TV is to be stored
for a period of time, remove the batteries from the
remote control.
EN-11 Digital LED LCD television user's manual 11 Digital LED LCD television user's manual Digital LED LCD television user's manual
Do not discard batteries with common domestic waste.
Do not throw batteries in a fire. Ensure batteries are
disposed of in accordance with local regulations.
Getting started
Setting up

Location

You will need to place your TV near your plug socket
(so the power cable can comfortably reach) and within
reach of your aerial socket or extension lead.

Connecting the aerial

Insert the TV aerial lead into the aerial input socket
on the side of the TV.
Insert the batteries into the remote control. Make
sure the batteries have been inserted correctly and
match the polarity indicated inside the battery
compartment.

Switching your TV on

If the indicator light not appears, press the button
on the right of the TV bottom, then the light will
start flashing.
Press POWER on the remote control. The TV will turn
on. After a few moments, the following screen will
be displayed.
Press the OK button on the remote control to enter
the Backlight Mode menu.