2X6 Crossover - dbx DriveRack User Manual

Section 5

5.1 2X6 Crossover

Left Low
Right Low
DriveRack™ PA User Manual
30
Application Guide
This Application guide section is provided to offer suggested installation applications of the
DriveRack™ PA that will allow you to optimize peak performance of the units. Note that the
25 included application programs represent the extensive flexibility of the DriveRack™ units.
These applications can be used verbatim, or as sample reference guide templates for designing
countless audio applications.
Hardware
1. Connect the outputs from the mixer to the inputs of the DriveRack™.
2. Connect the outputs of the DriveRack™ PA and run to the selected speaker amplifier.
3. Make sure that the mixer and power amps are turned off prior to powering up the
DriveRack™ PA.
Software
1. From Program mode, select factory program #F10 (SR4702 2X6) as a template, or use the
Wizard to setup the specific program.
2. Once the program has been chosen, press the DATA wheel to load the program.
Left Mid
MA-5002VZ
Left Mid
Left Sub
Left
Right
Right Mid
MA-3600VZ
Left High
SR4731XF
SR4719X
DriveRack
Left High
Right High
1 2 0 2 1 2 0 2
Right Mid
SR4731XF
SR4719X
™
PA
MA-1202
Right High
Right Sub
®