Navigating The Eq Section (Geq/Peq); Navigating The Subharmonic Synthesizer Section - dbx DriveRack User Manual

DriveRack
2.3 Navigating the EQ Section (28-GEQ and PEQ)
To edit the parameters of the EQs used in a selected program, simply use the following procedure. From program mode,
press the EQ button to reach the EQ module to be edited. Successive presses of the EQ button will move through each channel.
Navigate through the Pages of the selected EQ section by depressing "Next Page" or "Prev Page" successively until arriving at the desired Page.
The EQ button
toggles through
the EQs used in
each channel of
the selected
program
menu.
2.4 Navigating the Subharmonic Section
From program mode, press the SUBHARMONIC button. Pressing the Data Wheel will select the effect parameter to be edited.
<PREV PG NEXT PG>
The NEXT and PREV
buttons scroll through
the pages of selected module.
®
™
PA
EQ
GEQ
On/Off
GEQ
Flatten/Restore
or
EQ
PEQ On/Off
PEQ
Flatten/Restore
Bell,HSelf, LShelf, LHShelf,
Successive presses of the Data wheel will select
effect parameters within the currently selected page.
Subharmonic
Subharmonic - -On/Off
Subharmonics % 0-100
Successive presses of the Data wheel will select
effect parameters within the currently selected page.
Editing Functions
Frequency
Gain -12dB to12dB
Band 1 Freq Band 2 Freq
Gain -12dB to12dB Gain -12dB to12dB
Q .20 to 16.0 Q .20 to 16.0
24-36Hz Level - 24-36Hz
36-56Hz Level - 36-56Hz
DriveRack™ PA User Manual
Section 2
GEQ/PEQ
Band 3 Freq
Gain -12dB to12dB
Q .20 to 16.0
SUBHARMONIC
13