Troubleshooting - Indesit IWDE 7145 Instructions For Use Manual

Troubleshooting

see “Assistance”
GB
Problem: Possible causes / Solutions:
The Washer-dryer does not
switch on.
The wash cycle does not start.
.
The Washer-dryer does not take
in water ("H2O" will flash on the
display).
The Washer-dryer continuously
takes in and see “Installation”)
drains water. see “Installation”)
The Washer-dryer does not drain
or spin.
see “Wash cycles and options”
see “Installation”)
The Washer-dryer vibrates a lot see “Installation”)
during the spin cycle. see “Installation”)
see “Installation”)
The Washer-dryer leaks. see “Installation”)
see “Care
and maintenance”)
see “Installation” .
The "option" indicator lights and the
"start/pause" indicator light flash
and an error code appears on the
display (e.g.: F-01, F-..).
There is too much foam.
The washer-dryer does not dry.
OFF
11