Suunto Memory Belt User Manual page 10

CONNECTING TO THE DOCKING STATION
Connect the docking station by plugging the cable into your PC's USB port. Then place your
Suunto Memory Belt into the docking station as shown in the figure below.
When the belt is connected to your PC via the docking station, a medium-length beep and a
medium-length green flash indicate that the connection is successful.
DOWNLOADING AND ANALYZING DATA
Use the PC software to start transferring the data from the Suunto Memory Belt. You can
then view the data in graphical form and analyze it in more detail using Suunto Team Man-
ager or Suunto Training Manager PC software. For activating the data transfer, please refer
to the Help of the software you are using. 3 short beeps and 3 short green flashes indicate
when the belt is disconnected from the PC.
8
1 medium green
1 medium
connected to PC